Dual Power Automatic Transfer Switch 2P 100A ATS Dual Power Generator Changeover Switch 110V Mini Electrical Selector Switches

- ?【Excellent Performance】When a power supply fails, it will automatically connect one or more load circuits from one power supply to another to ensure the normal power supply of the load circuit. The switch supports multiple protection functions, including short circuits, overload, phase loss and under-voltage protection, to ensure your safety during use. - ?【Fast Stable Switching 】This dual power transfer switch can easily switch between the main power supply and the standby power supply, and the switching time is only 2 seconds. It uses a pure copper motor to ensure its stable operation and minimize the noise generated during use, so you don't have to worry about its operation interfering with your normal rest. - ?【High Assurance】This dual power generator changeover switch is a good product with high assurance and high reliability because it adopts high-quality motor and protective cover protection and has passed CE-level professional certification. - ?【Manual/Automatic Integration】Equipped with manual and automatic switching buttons. For automatic mode, the color-given toggle switch is set to the left position, and for manual mode, it is set to the right position to meet different requirements. - ?【Wide Application】This dual power generator changeover switch can be applied to various scenarios such as elevators, surveillance, fire fighting, office buildings, etc. It is suitable for household electricity and various large places such as ports and terminals, banks and mechanical plants.

Product description

Rated Working Voltage: AC110V

Our dual power automatic transfer switch is a device that can automatically switch between the main power supply and the backup power supply. It can ensure timely switching to the backup power source in case of main power failure, thereby ensuring the continuity and stability of the power supply. It not only improves the reliability and safety of the power mechanism but also simplifies maintenance work, making it an indispensable component of modern power mechanisms.

Material: ABS, Red Copper, Tinned Iron

Conversion Time: ≤50MS

Working Temperature: -5~50℃/23~122℉

Mounting Hole Size: M6

Rated Frequency: 50Hz/60Hz

Impact Resistance Voltage: 8KV

Insulation Voltage: 690V

Electrical Level: PC

Number of Poles: 2P

Notes

1. Please strictly follow the instructions and pay attention to the safety precautions inside.

2. This product belongs to electrical maintenance and installation, so it is important to ensure that the operator holds electrician qualification and takes necessary power off and insulation protection measures.

3. Please note that the switch cannot turn the generator on or off.

4. When the normal power supply and standby power supply are powered, the switch will give priority to using the normal power supply.

5. The normal/standby power supply should be an AC 110V power supply. If it is a DC or low-voltage power supply, you need to use an inverter to convert it into an AC 110V power supply

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.