60A Smart MPPT Solar Charge Controller MPPT Controller up to 1440W Solar Panels 12V/24V DC Output with Dual USB Port for LiFePO4 AGM Sealed Gel Flooded Lithium Battery (APP Control)

- ??【Advanced/efficient tracking technology】Adopting an intelligent maximum power point tracking algorithm, this smart MPPT solar charge controller tracks panel peak power in real time for optimal battery charging. Delivering over 30% higher efficiency than traditional PWM controllers and up to 99.9% conversion efficiency, it boosts charging performance and prolongs battery lifespan. - ??【60A MPPT Solar Charge Controller】 Our MPPT controller features a high - ampere capacity of 60A and automatically recognizes system voltages of 12V/24V, and is compatible with solar panels within the 18 - 100V range. Ideal for both residential and industrial solar setups, it powers any device stably. - ??【Battery Versatility】 Our Solar Charge Controller is compatible with LiFePO4, AGM sealed gel, and flooded lithium batteries. You can freely select the most suitable battery for your requirements without any compatibility concerns, ensuring efficient energy storage and a reliable solar power system.? - ??【Smart Solar Control & Dual USB Charging】 Remotely manage your solar system via WiFi/Bluetooth on our intuitive app, tracking charge status and total energy production. Dual USB ports enable direct solar charging for phones and tablets, perfect for outdoor adventures or emergency backups. app/wifi Control - ??【Safety features】 This solar panel controller has a current limiting charging mode that ensures the charging current reaches the rated level when the panel power exceeds a certain level and the charging current is delayed. It also has comprehensive protections including overvoltage, short circuit, reverse connection, reverse charging, over temperature, and TVS lightning protection.

Product description

Solar Controller Quick Setup

1. Connect Battery

Only connect wires to BAT+ and BAT- terminals. Screen should light up, showing battery voltage.

2. Set Battery Type (Do this now)

Press SET to enter menu.- Select battery type (USE/FLD/GEL/SLD/LI). Use “UP/DOWN” to choose, press “SET” to save.

3. Connect Solar Panel

Connect wires to PV+ and PV- terminals.

Controller will detect voltage and start charging.

4. Connect Load (If needed)

After setup, connect devices to LOAD+ and LOAD-.

5.Final Check: Display should show solar charging in progress!